Phelps County Commercial Real Estate & Personal Property Auction

Auction Date:

June 27, 2025 | 10:00 am

Auction Location / Nearest City:

124 Parker Lane in St. James, Missouri 65559

view full listing info & Photos

Auction Description:

Phelps County Commercial Real Estate & Personal Property Auction
Live and Online Auction
Auction Date/Time: June 27th, 2025 – 10:00am
Location: 124 Parker Lane in St. James, Missouri 65559

We will start promptly at 10:00 AM and offer the building and real estate first then follow immediately with the on-line portion of the inventory and shop equipment then possibly run two rings to sell the remaining hand tools, shop equipment and inventory.

Real Estate Info.
Commercial 5770 sq. ft. building with concrete parking lot, sitting on a .66-acre lot that measures 111.83 ft. x 253.76 ft. at 124 Parker Lane in St. James, Missouri.
The original building was built in 1977 and is divided into three basic connecting sections. The front section was used as the NAPA retail parts store and measures approximately 51 ft. x 40 ft. with a brick front wall with large windows, front entrance door and access door to the shop area. This section has a concrete floor, is insulated, heated and cooled, has a single restroom facility and overhead storage area.
The connected shop area was used as a full-service automotive repair shop and is approx.. 51 ft. x 40 ft. with a full concrete floor, is heated by a functioning used oil furnace with a backup LPG forced air furnace. This section has an 11 ft. x 12 ft. overhead insulated door with an electric opener and is wired for 100v and 220v electric. It is being sold with a built-in front end alignment machine.
The third connected section is 35 ft. x 41 ft. and was used for a painting booth and storage. This section is a pole frame structure with full concrete floor, two 11 ft. x 12 ft. insulated overhead doors, plus walk-in doors and is wired.
NOTE: We will be selling the real estate subject to approval from the City of St. James Planning and Zoning.

ON-LINE EQUIPMENT & INVENTORY
Steel welding table, steel brake, Wilton grinder, 6” vise
Floor model lathe, 12” swing, 3 jaw chuck, accessories
1981 Enco milling & drilling machine, model 91002, floor model, variable speed, accessories
Rolling tool chest, 13-drawer
Accu turn rotor lathe, floor model, accessories
Porta-matic air lift
Coats 1011 tire balancer
Coats RC-15A tire changer
Campbell Hausfeld upright air compressor, 60 gal. 6.5 hp
Emax model E-350 vertical air compressor , 80 gal. like new
Esab model LHE200UM portable welder, 220v
Hobart Champion 16 welder/generator, Onan Performer 16 motor
Acetylene torch set, tanks, gauges, hoses & cart
Napa service cart, 4-drawer
Roblnair Cool-Tech 34788 air conditioner machine, portable, 110v
Worth 2-post lift, model 9000ACF, electric over hyd., 4.5-ton
Grand 2-post lift, model TPO-9
Ben Pearson tube master pipe bender model MB(, floor model, 220v, w/ dies, extender, bender
New exhaust pipes & mufflers, 2”, new old stock, approx.. 50 mufflers & 50 sticks of pipe
Lincoln Ideal Arc SP200 mig welder, 220v w/ tank
Twentieth Century mig welder, 220v w/tank
Blast cabinet sand blaster, floor model, foot pedal
Thermal Dynamics Pak Master 50 plasma cutter, 220v
Grand 2-post lift, Model TPO-9, 4.5 ton
Coll Crimp super hydraulic hose machine
Mini Tune Inc. generator, alternator, starter tester
Ferris zero-turn lawn mower, 60” deck, 32 hp B & S motor, 106 house
STORE & SHOP EQUIPMENT
Weatherford cabinet w/ 140 compartments w/ brass & steel fittings
Lot of old automotive cabinets
9 – 72-Compartment bolt cabinets w/ bolt inventory, standard. Metric, some grade 8
Lots of misc. parts & inventory racking
36 Compartment metal cabinet w/ bolt inventory
Lot of commercial 4 ft. island & wall shelving
Lot of parts bins
8 – Double sets of gray shelving
DeWalt 14” bench model cut-off saw
Metal 6’ shop bench w/ 6” swivel vise
14” Bench model cut-off saw
Atlas tune-up center
Lot of battery cables & ends
Lot of new & used taps & dies
Continental 30-ton hyd. press w/ jack
Warn 12v winch, brand new, 9000 lb.
1/2- Ton floor model hyd. transmission jack
Craftsman floor model 110v variable speed drill press
Sioux valve grinder on stand
Barrett floor model brake rivet machine
Floor model rotary sander
Van Norman 557 grinder, 2 hp 220v
Peerless floor model power hacksaw
Van Norman hyd. bearing bar
Set of A/C gauges
Steel shop table on casters
2 – Craftsman two-piece tool chests
Snap-On tool chest
NAPA tool chest (New)
Eastwood MIG 175 – 110v welder
Lincoln 220v stick welder
Lots of jack stands
Lots of hyd floor & bottle jacks
Parts washer
Snap-on voltage tester
Portable oil drain tank
Hyd. engine hoist
R-12 freon
2 Sets of aluminum ramps
Lot of sockets, deep well, shallow, swivel, impact, metric & standard 1/4,3/8, 1/2 and ¾ there are 1000s
Lot of hammers
Lot of bearing pullers & splitters
Lot of pneumatic shop tools
Square oil tank w/ pneumatic pump
Lot of C clamps
Craftsman 5600w, 10 hp portable generator
LAWNMOWERS
Troy Bilt TB 130- 21” self-propelled lawn mower
Craftsman 21” lawn mower, self-propelled
INVENTORY
Rack w/ threaded rods
Brake line rack w/ inventory
Lot of non-returnable auto parts, electrical, windshield wipers, U joints, filters, chemicals, fuel lines
Lot of automotive body parts, equipment, paint, molding, handles, etc.
Lot of electrical connectors & lights
Lot of automotive hoses, air, heater and Hydraulic
Lot of 12v automotive head lights, spark plugs, wiring
Lot of wheel bolts
Lot of O rings, gaskets & seals
Cabinet of brass brake line bleeders
Lot of muffler clamps
Lot of cotter pins, snap pins, etc.
Lot of bearings
TRACTORS & EQUIPMENT
AC D-14 gas tractor, wide front, snap coulter hitch
Farmall 450 gas tractor, complete, Schwartz wide front, 2 pt. hitch Salvage
JD 1518 hyd. fold rotary cutter, airplane tires, 540 PTO
AUTOMOBILES
Oldsmobile Royal 4-door car
Oldsmobile Regency 4-door car

NOTE: We are still in the sorting, clean-up and discovery phase of the auction. We anticipate selling lots of the shelving, cabinets, and shop equipment in place. In addition to as many as 10 wagon loads of hand tools, inventory, parts and accessories, so please come early, plan on staying a while and bringing some help.

Willy and Shirley are lifelong members of the St. James, Phelps County community and worked side by side. They operated a very successful parts and automotive repair business and for decades provided a reliable place for people to buy a complete line of automotive parts and get repairs done. Over that time, they have managed to collect a wide variety of new and used inventory, a good selection of shop equipment and a multitude of support items, it is all here, please come by and check it out.

CONTACT FOR INFORMATION: Drew Busch 573-864-6896
Seller:
WILLIAM & SHIRLEY EICKHORST
For More Information:
Call Charlie Nordwald 636-795-4552